Pvc Water Pipe

Product Details:

1. OPVC Pipes are available Class 500 Coefficient 1.4 and 1.6 from 63 mm to 315 mm diameter of 12.5Kgf/cm2 to 25Kgf/cm2 pressure.
2. Now available from 110mm to 630mm dia,-12.5kg,16kg,20kg and 25kg pressure rating
3. Lower Weight Compared to PE 100 Pipes – 2.5 Times lower weight and DI pipes – 8 times lower weight
4. Higher DI There Pipes have Higher ID compared to PE 100 and DI pipes, ALLOWING MORE FLOW OF WATER.
5. FLOW OF WATER C-150 allows more flow of water.
6. Lower WATER HAMMER EFFECT Due to its ductility, OPVC pipes are safest pipes at adverse negative pressure.

7. Easy Installation Push fit joint easy and fast.no welding, no solvent cement, and no leaks at all.

8. Areas for installation Can be installed on hilly slopes, forest areas, high water table areas, in all terrain OPVC pipes can be laid easily. Due to its lightness and Push fit joints, up to 315mm no heavy equipment required to lift pipes.

   1. Lowest Pumping cost or energy cost These pipes have lowest pumping and energy cost C150 and higher ID.

   2. On long Installation Up to 22deg, no bend is required as pipe is flexible enough to take the bend.

   3. Faster in Installation Compared to any other piping system, these pipes are faster to install whereby reduce project completion time and cost both.

   4. Installation Trenches are normal excavation No need for concrete bed like GRPF pipes, joints are push joints, no need for welding like PE pipes, Being Light weight 8 times lower weight than DI pipes, no heavy equipment’s required to install up to 400mm pipes expect trenching.

   5. OPVC specials These are available which cost less than DI specials like bends, service joints and reducers.

   6. Homogeneous socket The main Specific Feature which is an add-on of the technology we promote is homogeneous single-process socketing at the time of orientation. Socketing at the time of orientation enhances the strength of socket, equaling it to that of PVC-O pipe.

   7. Push-fit joints This technology provides push-fit joints with Anger Lock EPDM rubber with PP Lip confirming to ISO Standards.

   8. Length 6meters including socket. Diameter wise overlapping lengths are respectively 110mm – 02.92%, 160mm – 03.33%, 200mm – 03.75%, 250mm – 04.50%, 315mm – 05.42% and 400mm – 06.25%

   9. Pipes Sustainability Pipes shall convey water under variable temperature conditions ranging 1Deg C to 45Deg C.